Panasonic DMC-FX33 The picture is not displayed fully on the TV, The camera becomes warm

Others

–Connect the camera to the TV with the AV cable (supplied) and then play back the pictures on the camera. (P97)

4:The picture is not displayed fully on the TV.

•Set the aspect of the TV on the camera. (P19)

5:The picture cannot be transferred when the camera is connected to a PC.

•Is the camera connected to the PC correctly?

•Is the camera recognized by the PC correctly?

6:The card is not recognized by the PC.

(The built-in memory is recognize.)

•Disconnect the USB connection cable. Connect it again while the card is inserted in the camera.

7:The picture cannot be printed when the camera is connected to a printer.

•Does the printer support PictBridge?

•Reset the mode to [ ]. (P94)

8:The ends of the pictures are cut at printing.

•When using a printer with a trimming or borderless printing function, cancel this function before printing. (For details, refer to the operating instructions for the printer.)

•When you order photo studios to print pictures, ask the photo studio if the pictures can be printed with both ends.

∫Others

1:An unreadable language was selected by mistake.

•Press [MENU/SET], select the [SETUP]

menu icon [ ] and then select the [ ] icon to set the desired language. (P20)

2:The setting for the auto review function is disabled.

•Are you taking pictures using auto bracket (P40)? Is the camera in burst mode (P63) or motion picture mode [ ] (P50), [SELF PORTRAIT] (P43)

or [HI-SPEED BURST] (P47) in scene mode?

Is [AUDIO REC.] set to [ON] (P61)?

–In these cases, you cannot set the auto review function in the [SETUP] menu.

3:A red lamp sometimes turns on when the shutter button is pressed halfway.

•In dark places, the AF assist lamp (P64) lights red to make it easier to focus on a subject.

4:The AF assist lamp does not turn on.

•Is [AF ASSIST LAMP] on the [REC] mode menu set to [ON]? (P64)

•Are you taking pictures in dark places?

–The AF assist lamp does not turn on in bright places.

•The AF assist lamp does not turn on when [SELF PORTRAIT], [SCENERY], [NIGHT SCENERY], [SUNSET], [FIREWORKS] or [AERIAL PHOTO] in scene mode is selected. (P41)

5:The camera becomes warm.

•The surface of the camera may become warm during use. This does not affect the performance or quality of the camera.

6:The lens clicks.

•When the brightness changes due to zoom or camera movement etc., the lens may click and the picture on the screen may drastically change.

However, the picture is not affected. The sound is caused by the automatic adjustment of the aperture.

This is not a malfunction.

7:The clock is reset.

•If you do not use the camera for a long time, the clock may be reset. When the message [PLEASE SET THE CLOCK] appears, set the clock again. (P14)

•When you take a picture before setting the clock, [0:00 0. 0. 0] is recorded.

8:The displayed picture is slightly distorted.

109

VQT1J82