Panasonic DMC-FX33 operating instructions When using the built-in memory When using the card

•The access indication lights red when pictures are being recorded on the built-in memory (or the card).

–When using the built-in memory

–When using the card

•Do not do the following when the access indication lamps lights. The card or the data on the card may be damaged and this unit may no longer operate normally.

–Turn this unit off.

–Remove the battery or the card. (when using a card)

–Shake or bump this unit.

–Disconnect the AC adaptor. (DMW-AC5PP; optional) (when using the AC adaptor)

•Do not do the above when pictures are being read or deleted or the built-in memory (or the card) is being formatted. (P90)

•The access time for the built-in memory may be longer than the access time for a card.

11Shutter speed (P22)

12Aperture value (P22)

•If the exposure is not adequate, the aperture value and the shutter speed turn red. (They do not turn red when the flash is activated.)

13Optical Image Stabilizer (P63)

•Refer to P99 for information about other screen displays.

∫Switching the screen display You can change the screen display by pressing [DISPLAY]. This allows you to display information while taking pictures such as the picture size or the number of recordable pictures or take pictures without displaying any information. Refer to P31 for details.

Preparation

21

VQT1J82