Panasonic DMC-FX33 operating instructions Inserting and Removing the Card optional/the Battery

Preparation

•The terminals of the charger or the battery are dirty. In this case, wipe them with a dry cloth.

•When the operating time of the camera becomes extremely short even after properly charging the battery, the life of the battery may have expired. Buy a new battery.

∫Charging conditions

•Charge the battery in a temperature between 10 oC to 35 oC (50 oF to 95 oF). (The battery temperature should also be the same.)

•The performance of the battery may temporarily deteriorate and the operating time may become shorter in low temperature conditions (e.g. skiing/ snowboarding).

•The battery may swell and its operating time may become shorter as the number of times it is charged increases. For long term battery use, we recommend you do not frequently charge the battery before it is exhausted.

Inserting and

Removing the Card

(optional)/the Battery

•Check that this unit is turned off.

•Prepare a card. (optional)

•You can record or play back pictures on the built-in memory when you are not using a card.

1 Slide the release lever in the direction of the arrow and open the card/battery door.

12

•Always use genuine Panasonic batteries (DMW-BCE10PP).

•If you use other batteries, we cannot guarantee the quality of this product.

2Battery:

Insert it fully being careful about the direction you insert it.

Pull the lever A in the direction of the arrow to remove the battery. Card:

Push it fully until it clicks being careful about the direction you insert it.

To remove the card, push the card until it clicks, then pull the card out upright.

A

B

B: Do not touch the connection terminals of the card.

•The card may be damaged if it is not fully inserted.

31:

Close the card/battery door.

2:

Slide the release lever in the direction of the arrow.

•If the card/battery door cannot be completely closed, remove the card, check its direction and then insert it again.

VQT1J82