Connecting to other equipment

Connecting to a PC

You can acquire recorded pictures to a PC by connecting the camera and the PC. The software [LUMIX Simple Viewer] or [PHOTOfunSTUDIO-viewer-]

(for Windows®) in the CD-ROM (supplied) allows you to easily acquire pictures recorded with the camera to a PC, print them and send them by e-mail.

If you use “Windows 98/98SE”, install the USB driver and then connect it to the computer.

Read the separate operating instructions for the supplied software for more information about the software in the CD-ROM (supplied) and how to install it.

1

AV OUT

 

DIGITAL

DC IN

AUSB connection cable (supplied)

B AC adaptor (DMW-AC5PP; optional)

• Use a battery with sufficient battery power or the AC adaptor (DMW-AC5PP; optional).

Turn the camera off before inserting or removing the cable for the AC adaptor (DMW-AC5PP; optional).

Set the camera to a mode other than [] mode.

1 Turn on the camera and the PC.

2 Connect the camera to a PC via the USB connection cable A (supplied).

Connect the USB connection cable with the [ ] mark facing the [2] mark on the [DIGITAL] socket.

Hold the USB connection cable at 1 and insert straight in or take straight out. (If you forcibly insert the USB connection cable at a slant or upside down you can deform the connection terminals and damage the camera or the connected equipment.)

ACCESS

CThis message appears during data transfer.

[Windows]

The drive appears in the [My Computer] folder.

If you are connecting the camera to a PC for the first time, the required driver is installed automatically so that the camera can be recognized by “Windows Plug and Play”. The drive then appears on the [My Computer] folder.

[Macintosh]

The drive is displayed on the screen.

The drive is displayed as [LUMIX] when you connect the camera with no card inserted.

The drive is displayed as [NO_NAME] or [Untitled] when you connect the camera with a card inserted.

About motion picture playback on a

PC

Use the software “QuickTime” in the CD-ROM (supplied) to play back motion pictures recorded on this camera on a PC.

91

VQT1J82

Page 91
Image 91
Panasonic DMC-FX33 operating instructions Connecting to a PC, Turn on the camera and the PC, Windows, Macintosh