Panasonic DMC-FX9GN operating instructions Folder Composition, Dcim, Misc, PictBridge PTP setting

Connecting to a PC or Printer

∫Folder Composition

The folder structure of the card or MultiMediaCard is displayed as the illustration below.

≥SD Memory Card DCIM

≥MultiMediaCard100_PANA

1

100_PANA

P1000001.JPG

2 3

P1000002.JPG

P1000999.JPG

101_PANA

999_PANA

MISC

1Folder number

2 File number

3 JPG: pictures MOV: motion pictures

Files will be saved in each folder as follows.

DCIM	Folders from [100_PANA] to
	[999_PANA]
100_PANA	Pictures/motion pictures
MISC	Files on which the DPOF
	print settings are recorded

•Picture data of up to 999 pictures recorded by the camera can be included in 1 folder. If the number of picture data exceeds 999, another folder will be created.

•When you reset the file number or the folder number, select [NO.RESET] in the [SETUP] menu. (P22)

•If the remaining battery power is exhausted during communication, the recorded data may be damaged. When you connect the camera to the PC, use a battery with sufficient battery power (P13) or the AC adaptor (DMW-AC5; optional).

•If the remaining battery power becomes low during communication, the battery indication turns red and blinks (P13) and the alarm beeps. In this case, stop the communication at once.

•While [ACCESS] is being displayed, do not disconnect the USB connection cable.

•When the OS of your PC is Windows 2000 and you connect the camera to the PC with the USB connection cable, do not replace the card with the camera connected to the PC. The information in the card may be damaged. Make sure to disconnect the USB connection cable beforehand when you replace the card. For details, refer to the separate operating instructions for PC connection.

•Do not use any other USB connection cables except the supplied one.

•Also refer to the operating instructions of the PC.

∫PictBridge (PTP) setting

Even if you set the [USB MODE] to [PictBridge (PTP)], you can connect to the PC only when the OS is Windows XP Home Edition, Windows XP Professional or Mac OS X.

•You can only load pictures from the camera and cannot write them on the card or delete them.

•When there are 1000 or more pictures on a card, the pictures may not be imported.

94

VQT0S74