Panasonic DMC-FX9GN Connecting to a PictBridge-compliant Printer, PICTURE. P96, PICTURE. P97

Connecting to a PC or Printer

Connecting to a PictBridge-compliant Printer

By connecting the camera directly to a printer supporting PictBridge via the USB connection cable (supplied), you can select the pictures to be printed or start printing on the LCD monitor.

Set the print settings such as print quality on the printer beforehand. (Read the printer operating instructions.)

AV OUT

DIGITAL

DC IN

A: USB connection cable (supplied)

B: AC adaptor (DMW-AC5; optional)

•Turn off the camera before inserting or removing the cable for the AC adaptor (DMW-AC5; optional).

1 Turn the camera on and then set [USB MODE] on the [SETUP] menu to [PictBridge (PTP)]. (P92)

2 Turn on the printer.

3 Connect the camera to a printer via the USB connection cable A (supplied).

•Connect the USB connection cable with the [ ] mark facing the [2] mark on the [DIGITAL] socket.

•Hold the USB connection cable at C and insert straight in and take straight out.

When the DPOF	Select [SINGLE
Print is not set.	PICTURE]. (P96)
When the DPOF	Select [DPOF
Print is set. (P82)	PICTURE]. (P97)

•It may take time to print some pictures. Therefore, use a battery with sufficient battery power (P13) or the AC adaptor (DMW-AC5; optional) when you connect to a printer.

•If the remaining battery power becomes low during communication, the battery indication turns red and blinks (P13) and the alarm beeps. In this case, stop the communication at once.

•Disconnect the USB connection cable after printing.

•Do not use any other USB connection cables except the supplied one.

•For printing the age in [BABY] (P59) in scene mode, print from a PC using the software [LUMIX Simple Viewer] in the CD-ROM (supplied). For details, refer to the separate operating instructions for PC connection.

95

VQT0S74