Others

Using the MC Protector/ND Filter

The MC protector (DMW-LMC72; optional) is a transparent filter which affects neither the colours nor the amount of light, so it can always be used to protect the camera’s lens.

The ND filter (DMW-LND72; optional) reduces the amount of light to approximately 1/8th (equal to adjusting the aperture value 3 increments) without affecting the colour balance.

1Remove the lens cap and the lens ring.

2Attach the lens hood.

3Attach the MC protector 1 or the ND filter 2.

Cap 3 (supplied with MC protector)

¬Suggestions/Tips ¬

The lens cap supplied with the camera cannot be attached to the MC protector or the ND filter.

You cannot attach the MC protector and the ND filter at the same time.

When taking pictures with the flash using the MC protector/ND filter, vignetting effect may occur.

When the MC protector/ND filter fell, they may be destroyed. Be careful not to drop them when attaching.

The cap supplied with MC protector can also be used for the ND filter.

115

Page 115
Image 115
Panasonic DMC-FZ10GN operating instructions Using the MC Protector/ND Filter, 115