Preparation

Charging the Battery

Charge the battery before using.

1Connect the AC cable.

The AC cable does not fit entirely into the AC input terminal. A gap will remain as shown below.

The [POWER] Indicator A lights.

The battery cannot be charged when the DC cable is connected to the AC adaptor.

2Attach the battery to the AC adaptor.

3Detach the battery.

¬Suggestions/Tips ¬

After use, be sure to disconnect the AC cable.

The battery becomes warm after use/ charge or during charge. The camera also becomes warm during use.

However, it is not a malfunction.

The battery and AC adaptor are designed only for this camera. Do not use them with any other equipment.

Do not disassemble or alter the AC adaptor.

When the [CHARGE] Indicator B lights, charging starts.

When the [CHARGE] Indicator B turns off (in about 90 minutes), charging is finished.

10

Page 10
Image 10
Panasonic DMC-FZ10GN Charging the Battery, Connect the AC cable, Attach the battery to the AC adaptor Detach the battery