Panasonic DMC-FZ30PP operating instructions Beep, Shutter, Volume, Clock SET

Preparation

[SETUP] menu (Refer to P21 for the setting method.)

[POWER SAVE] [1MIN.]/[2MIN.]/[5MIN.]/[10MIN.]:

The power save mode is activated (the camera is automatically turned off to save the battery life) if the camera has not been used for the time selected on the setting.

[OFF]: The power save mode is not activated.

•Press the shutter button halfway or turn the camera off and on to cancel the power save mode.

•When using the AC adaptor (DMW-CAC1; optional)/connecting to a PC or a printer/ recording motion pictures/playing back motion pictures/during Slide Show, the power save mode is not activated. (However, during a manual Slide Show, the setting for the power save mode is fixed to [10MIN.])

[MF ASSIST] (Recording mode only)

In manual focus, assistance screen appears on the center of the screen to facilitate focusing on the subject. (P46) [MF1]: The center of the screen is

enlarged. You can adjust the focus while determining the composition of the whole of the screen.

[MF2]: The whole of the screen is enlarged. It is convenient for adjusting the focus in Wide.

[OFF]: The screen is not enlarged.

	[BEEP]
[	]: No operational sound
[	]: Soft operational sound
[	]: Loud operational sound

[SHUTTER]

Set to select the volume of shutter sound.

[	]:	No shutter sound
[	]:	Soft shutter sound
[	]:	Loud shutter sound

[VOLUME]

The volume of speakers can be adjusted in 7 steps. (LEVEL 6 to 0)

•When you connect the camera to a TV, the volume of the speakers of the TV is not changed.

[CLOCK SET]

Change date and time. (P20)

[NO.RESET]

Set this when you want to start the file number of the picture from 0001 on the next recording. (The folder number is updated, and the file number starts from 0001.)

•The folder number can be assigned from 100 to 999.

When the folder number reaches 999, you cannot reset the file number. We recommend formatting the card after saving the data on a PC or elsewhere.

•To reset the folder number to 100, format the card first and then use this function to reset the file number.

After that, the reset screen for the folder number appears. Select [YES] to reset the folder number.

•Refer to P119 for detailed information about the file number and the folder number.

23

VQT0R81