Preparation

Attaching/Removing the Lens Hood

In bright sunlight or backlight, the lens hood will minimize lens flare and ghosting.

The lens hood cuts out excess light and improves the picture quality.

Check that the camera is turned off.

Close the flash.

When attaching the lens hood

1 1 Place the camera upside down.

2Align lens hood mark A with lens hood positioning groove B on the unit and insert it straight in

Make sure the lens hood is properly attached.

When removing the lens hood

Press lock release button C and remove the lens hood

Temporarily storing the lens hood (Temporary storage)

1 1 Place the camera upside down.

2Remove the lens hood and turn it around, aligning lens hood mark A with lens hood positioning groove B on the unit, and insert it straight in

When removing the lens hood

Press lock release button C and remove the lens hood

18

VQT0R81

Page 18
Image 18
Panasonic DMC-FZ30PP operating instructions Attaching/Removing the Lens Hood, When attaching the lens hood