Preparation

Inserting/Removing the Card

Check that the camera is turned off.

Close the flash.

1 Slide the card door to open it.

The card may be damaged if it is not fully inserted.

3 1 Close the card door.

2Slide the card door to the end to close it firmly.

The card and the data may be damaged if it is inserted or removed while the camera is on.

We recommend using Panasonic’s SD Memory Card. (Use only the genuine SD card with SD Logo.)

If the card door cannot be completely closed, remove the card and insert it again.

2Insert:

Insert the card fully until it clicks and it is locked with the label facing the front of the camera.

Remove:

Push the card until it clicks, then pull the card out upright.

Check the direction of the card.

Do not touch the connection terminals on the back side of the card.

15

VQT0R81

Page 15
Image 15
Panasonic DMC-FZ30PP operating instructions Inserting/Removing the Card, Slide the card door to open it