Panasonic DMC-FZ30PP Set to Tele or Wide, Recordable range when using the conversion lens

Models: DMC-FZ30PP

1 148
Download 148 pages 4.72 Kb
Page 96
Image 96

Recording Menu Settings

4 Set to Tele or Wide.

5

1X

T(420) W(35)

420

300

50

35

(3

A: Zoom ring

• Always set to Tele when using a tele conversion lens and to Wide when using a wide conversion lens.

• The conversion icon ([ ] or [ ]) changes from red (blinking) to white.

When using a conversion lens, ensure the conversion icon is white when taking pictures. If pictures are taken when it is blinking, performance will not be up to specification.

Recordable range when using the conversion lens

Tele conversion lens

Indication

 

12k

 

 

 

Actual magnification

 

20.4k¢

35 mm film camera equivalent

 

714 mm

 

 

 

 

 

 

Wide conversion lens

 

Indication

 

1k

 

 

 

Actual magnification

 

0.7k

 

 

 

35 mm film camera equivalent

 

24.5 mm

 

 

 

¢The actual magnification when using digital zoom (P34) and extended optical zoom (P34) is 1.7k that of the Tele display.

96

Focus range is from 14 cm (0.46 feet) to (wide conversion lens) and from 5.5 m (18.0 feet) to (tele conversion lens).

Digital zoom cannot be used when using a wide conversion lens.

When there is dirt (water, oil, and fingerprints, etc.) on the surface of the lens, the image may be affected. Lightly wipe the surface of the lens with a soft, dry cloth before and after taking pictures.

Ensure that [CONVERSION] is set to [OFF] when not using a conversion lens.

When using the conversion lens:

The built-in flash cannot be activated. –If you set [CONVERSION] to [OFF], the performance of the conversion lens will

not be optimal.

When using the tele conversion lens: –We recommend using a tripod.

The stabilizer function may not work sufficiently.

The focus indication may light due to the jitter even if the subject is not focused.

The time required for focusing may become longer than usual.

If you use an extra flash when a conversion lens is attached, we recommend setting the extra flash to manual mode. Refer to the operating instructions of the extra flash for details.

If you set [CONVERSION] to [ ] or [ ], you cannot use the AF assist lamp. (P90)

Read the operating instructions of the conversion lens for details.

VQT0R81

Page 96
Image 96
Panasonic DMC-FZ30PP operating instructions Set to Tele or Wide, Recordable range when using the conversion lens