Panasonic DMCGX1XS Attaching the lens, Preparations Remove the lens rear cap from the lens

Preparation

Attaching the lens

Preparations: Remove the lens rear cap from the lens.

•If the body cap is fitted to the camera, remove it.

Align the lens fitting marks A (red marks) and then rotate the lens in the direction of the arrow until it clicks.

•Do not press the lens release button B when you attach a lens.

•Do not try to attach the lens when holding it at an angle to the camera body as the lens mount may get scratched.

•Be sure to remove the lens cap when recording.

Note

• Do not insert your fingers into the mount when the lens and body cap are removed from the camera body.

• To prevent dust or debris from adhering to internal parts of the camera body, fit the body cap to the mount on the camera body.

• To avoid damaging the contact points, fit the lens rear cap to the removed lens.

• It is recommended to attach the lens cap or attach the MC Protector (optional) to protect the lens surface when carrying. (P199)

- 15 -