Panasonic DMCGX1SBODY Touch SET Focus on the subject and take a picture, Focusing in Burst Mode

Recording

Touch [SET].

Focus on the subject and take a picture.

A When Burst Mode is set to high speed [H].

A

•Hold down the shutter button fully to activate the Burst Mode.

∫Focusing in Burst Mode

The focus changes depending on the setting for [FOCUS PRIORITY] (P152) in the [CUSTOM] menu and the Focus Mode setting.

Focus Mode	Focus Priority	Focus
AFS	ON	At the first picture
	OFF
AFF/AFC¢1	ON	Normal focusing¢2
	OFF	Predicted focusing¢3
MF	—	Focus set with Manual Focus

¢1 When the subject is dark or the burst speed is set to [SH], the focus is fixed on the first picture.

¢2 The burst speed may become slower because the camera is continuously focusing on the subject.

¢3 Burst speed takes priority, and focus is estimated within possible range.

Note

•We recommend using the remote shutter (DMW-RSL1; optional) when you want to keep the shutter button pressed fully while taking pictures in Burst Mode. Refer to P200 for information about the remote shutter.

•When the burst speed is set to [SH] or [H] (when the Focus Mode is [AFS] or [MF]), the exposure and White Balance are fixed at the settings used for the first picture for the subsequent pictures as well. Depending on the brightness of the subject, the second picture and subsequent pictures may be brighter or darker. When the burst speed is set to [H] (when the Focus Mode is [AFF] or [AFC]), [M] or [L], they are adjusted each time you take a picture.

•Since the shutter speed becomes slower in dark places, the burst speed (pictures/second) may become slower.

•When the flash is activated, you can take only 1 picture.

•The Burst Mode is disabled in the following cases.

–[MINIATURE EFFECT] in Creative Control Mode

–When White Balance Bracket is set

–When recording motion pictures

- 85 -