- 23 -
Preparation
Inserting and Removing the Card (optional)/the Battery•Check that this unit is turned off.
•We recommend using a Panasonic card.
Slide the release lever in the direction
of the arrow and open the card/
battery door.
•Always use genuine Panasonic batteries.
•If you use other batteries, we cannot
guarantee the quality of this product.
Battery: Being careful about the
battery orientation, insert all the way
until you hear a locking sound and
then check that it is locked by lever
A.
Pull the lever A in the direction of the
arrow to remove the battery.
Card: Push it securely all the way
until you hear a “click” while being
careful about the direction in which
you insert it.
To remove the card, push the card
until it clicks, then pull the card out upright.
B:Do not touch the connection terminals of t he card.
1:Close the card/battery door.
2:Slide the release lever in the
direction of the arrow.
Note
•Remove the battery after use. (The battery will be exhausted if le ft fo r a long peri od of ti me after
being charged.)
•The battery becomes warm after using it and during and after charging. The camera also
becomes warm during use. This is not a malfunction.
•Before removing the card or battery, turn the ca mera off, and wait until the status indicator has
gone off completely. (Otherwise, this unit may no longer operate normally and the card itself
may be damaged or the recorded pictures may be lost.)