Playback/Editing

[VIDEO DIVIDE]

Recorded motion picture can be divided in two. It is recommended for when you want to divide a part you need with a part you do not need.

Dividing a motion picture is permanent. Decide before you divide!

1Select [VIDEO DIVIDE] on the [PLAYBACK] Mode menu. (P62)

2Press 2/1 to select the motion picture to divide, and then press [MENU/SET].

3Press 3 at the location to divide.

Motion picture is played back from the same location when 3 is pressed again.

You can finely adjust the location for division by pressing 2/1 while the motion picture is paused.

4Press 4.

Confirmation screen is displayed. It is executed when [YES] is selected. Exit the menu after it is executed.

Motion picture may be lost if the card or battery is removed while processing the dividing.

Note

The [VIDEO DIVIDE] feature only works on motion pictures recorded on this camera.

Avoid trying to divide motion picture near the very beginning or end of the motion picture.

With [MP4] motion pictures, the order of pictures will change if divided.

It is recommended to search these motion pictures by using Calendar Playback (P53) or [VIDEO ONLY] in the [PLAYBACK MODE].

The [VIDEO DIVIDE] feature will be disabled during the following conditions:

Motion pictures with a short recording time

- 168 -

Page 168
Image 168
Panasonic DMC-GX1, DMCGX1SBODY, DMCGX1KBODY, DMCGX1XS owner manual 168, Video Divide