Basic

q[ECONOMY]

You can conserve the battery life by setting these menus.

Also, it will turn off the LCD monitor automatically when not in use to prevent discharge of the battery.

p[SLEEP MODE]:

The camera is automatically turned off if the camera has not been used for the time selected on the setting.

[OFF]/[1MIN.]/[2MIN.]/[5MIN.]/[10MIN.]

[AUTO LCD OFF]:

The LCD monitor is automatically turned off if the camera has not been used for the time selected on the setting.

[OFF]/[15SEC.]/[30SEC.]

Press the shutter button halfway or turn the camera off and on to cancel [SLEEP MODE].

[SLEEP MODE] is fixed to [2MIN.] when [AUTO LCD OFF] is set to [15SEC.] or [30SEC.].

Press any button to turn on the LCD monitor again.

[SLEEP MODE] does not work in the following cases.

When using the AC adaptor

When connecting to a PC or a printer

When recording or playing back motion pictures

During a slide show

o[AUTO REVIEW]

Set the length of time that the picture is displayed after taking the still picture.

[OFF]/[1SEC.]/[3SEC.]/[5SEC.]

[HOLD]:

The pictures are displayed until shutter button is pressed halfway.

If it is set to [HOLD] when the camera is set to [ ] or [ ], switching of the playback screen display or enlargement by rotating the rear dial is possible during Auto Review.

Regardless of the Auto Review setting, pictures will automatically be reviewed when taking burst pictures with [SH] or [H] set, and recording with Auto Bracket. (Will not hold)

[AUTO REVIEW] is disabled when Burst Mode is set to [M] or [L].

When [AUTO REGISTRATION] in [FACE RECOG.] is set to [ON], [AUTO REVIEW] can only be set to [3SEC.] or [5SEC.].

- 70 -

Page 70
Image 70
Panasonic DMCGX1KBODY, DMC-GX1, DMCGX1SBODY, DMCGX1XS owner manual Auto LCD OFF, Hold