Preparation

Changing the clock setting

1Press [MENU/SET].

2Press e/r to select [CLOCK SET].

3Press q and perform steps 3 and 4 for setting.

4 Press [MENU/SET] to close the menu.

• You can also set the clock in the [SETUP] menu. (P21)

Note

The clock is displayed when [DISPLAY] is pressed several times during recording.

When batteries have been inserted for more than 3 hours, the clock setting is stored in the camera for approximately 3 months even if the batteries are removed.

You can set the year from 2000 to 2099.

Set the date so that the correct date is printed when you order prints or use the text stamp. (P67)

If the clock is set, the correct date can be printed even if the date is not displayed on the screen of the camera.

About the Mode and Menu Operation

 

Mode switching

 

 

1

Slide the recording/playback switch A

 

to 1(up) or 5(down).

1: Recording Mode

5: Playback Mode

MODE

2

Press [MODE] to display the mode

 

selection screen.

(Example: Normal Picture Mode)

MODE

3

Press e/r to select a mode and press [MENU/SET] to close the menu.

 

Refer to corresponding page for more details on each mode.

VQT1X05 17

Page 17
Image 17
Panasonic DMC-LS85 operating instructions About the Mode and Menu Operation, Mode switching