Connecting to other equipment

4

Double-click [DCIM] folder.

 

 

5

Using a drag-and-drop operation, move the pictures you want to

 

acquire or the folder storing those pictures to any different folder on

the PC.

„Disconnecting the USB connection cable safely

Proceed with the hardware removal using “Safely Remove Hardware” on the task tray of the PC. If the icon is not displayed, check that [ACCESS] is not displayed on the LCD monitor of the digital camera before removing the hardware.

Note

We recommend placing a soft cloth under this unit to prevent scratching.

Turn the camera off before connecting or disconnecting the AC adaptor (optional: P103).

Before inserting or removing a card, turn the camera off and disconnect the USB connection cable. Otherwise, data may be destroyed.

With the Mac OS X v10.2 or an earlier operating system, set the Write-Protect switch of the SDHC memory card to the [LOCK] position when importing pictures from an SDHC memory card.

„Viewing the contents of the built-in memory or card using the PC (folder composition)

Built-in

 

 

DCIM

 

 

 

100_PANA

1 Folder number

 

 

 

 

memory

 

 

 

100_PANA

1

2 File number

 

 

 

 

 

 

 

 

P1000001.JPG

3 JPG : Pictures

• Card

 

 

 

 

 

 

 

 

 

 

MOV : Motion pictures

 

 

 

 

 

 

2

3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

P1000002.JPG

MISC: PRINT SET

 

 

 

 

 

 

 

 

 

 

 

 

P1000999.JPG

Favorite

 

 

 

 

 

 

 

 

 

 

 

101_PANA

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

999_PANA

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MISC

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A new folder is created when pictures are taken in the following situations.

When a card containing a folder with the same folder number has been inserted (Such as when pictures were taken using another make of camera)

When there is a picture with file number 999 inside the folder

„Connection in the PTP mode (Windows® XP, Windows Vista® and Mac OS X only) Select [PictBridge (PTP)] when connecting USB cable.

Data can now be read only from the card into the PC. When using Windows Vista, deleting pictures etc. is available.

• When there are 1000 or more pictures on a card, the pictures may not be imported in the PTP mode.

Using a PC with an SD Memory Card slot or a card reader

Attach the SD card according to the operating instructions of computer or card reader and perform steps 3-5on pages 75 and 76.

You cannot use SDHC cards if the computer or card reader does not support SDHC cards.

76 VQT1X05

Page 76
Image 76
Panasonic DMC-LS85 operating instructions Double-click Dcim folder, Using a PC with an SD Memory Card slot or a card reader