Panasonic DMC-LS85 Memory Card Error Format this CARD?, Memory Card Parameter Error

Others

[MEMORY CARD ERROR FORMAT THIS CARD?]

•This card has a format which is not recognized by the camera.

 Format the card again with the camera after saving necessary data on a PC etc. (P24)

[PLEASE TURN CAMERA OFF AND THEN ON AGAIN]/[SYSTEM ERROR]

•This message appears when the camera is not operating properly.

Turn the camera off and on. If the message persists, contact the dealer or your nearest Service Center.

[MEMORY CARD PARAMETER ERROR]

 Use a card compatible with this camera. (P15)

•You can only use an SDHC Memory Card if using cards with 4GB or more capacity.

[MEMORY CARD ERROR PLEASE CHECK THE CARD]

•Failed access to the card.

Insert the card again.

Insert a different card.

[READ ERROR PLEASE CHECK THE CARD]/ [WRITE ERROR PLEASE CHECK THE CARD]

•It has failed to read or write data.

Turn the camera off and remove the card. Insert the card again, turn the power on, and try to read or write the data again.

•The card may be broken.

Insert a different card.

[MOTION RECORDING WAS CANCELLED DUE TO THE LIMITATION OF THE WRITING SPEED OF THE CARD]

•When you set the picture quality to [WVGA] or [VGA], we recommend using a high- speed card with “10MB/s” or greater displayed on the package.

•If the operation stops even if you use the card with memory size of 10MB/s or greater, this means the data-writing speed become lowered. We recommend backing up the data and formatting the card. (P24)

•Depending on the type of SD Memory Card or SDHC Memory Card, motion picture recording may stop in the middle.

[A FOLDER CANNOT BE CREATED]

•A folder cannot be created because there are no remaining folder numbers that can be used. (P76)

 Format the card after saving necessary data on a PC etc. (P24)

[PICTURE IS DISPLAYED FOR 4:3 TV]/[PICTURE IS DISPLAYED FOR 16:9 TV]

•The AV cable is connected to the camera.

Press [MENU/SET] if you want to delete this message at once.

Select [TV ASPECT] in the [SETUP] menu to change the TV aspect. (P23)

•This message also appears when the USB connection cable is connected to the camera only. In this case, connect the other end of the USB connection cable to a PC or a printer. (P75, 77)

[PRINTER BUSY]/[PLEASE CHECK THE PRINTER]

•The printer cannot print.  Check the printer.

90 VQT1X05