Advanced-Viewing

3

Select the picture, and then

[SINGLE]

[MULTI]

 

press [MENU/SET].

 

 

Press w/q to

Press e/r/w/q to

select the picture.

select the pictures.

4

Press e/r to set the number of prints, and then press [MENU/SET]

 

to set.

• When [MULTI] has been selected, repeat steps 3 and 4 for each picture. (It is not possible to use the same setting for a multiple number of pictures.)

5 Press [4] to return to the menu screen.

Press [MENU/SET] to close the menu.

„Canceling all the [PRINT SET] settings

1Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET].

2Press e to select [YES] and then press [MENU/SET].

3Press [MENU/SET] to close the menu.

You cannot select [CANCEL] if no picture has been set for printing.

„To print the date

After setting the number of prints, set/cancel printing with the recording date by pressing [DISPLAY].

When you go to a photo printing store for digital printing, be sure to order the printing of the date additionally if required.

Depending on the photo printing store or the printer, the date may not be printed even if you set to print the date. For further information, ask at your photo printing store or refer to the operating instructions for the printer.

This function is canceled if you imprint the text stamp on the picture.

The date cannot be printed on pictures stamped with text.

Note

The number of prints can be set from 0 to 999.

With a printer supporting PictBridge, the date print settings of the printer may take precedence so check if this is the case.

It may not be possible to use the print settings with other equipment. In this case, cancel all the settings, and reset the settings.

If the file is not based on the DCF standard, the print setting cannot be set.

72 VQT1X05

Page 72
Image 72
Panasonic DMC-LS85 operating instructions To set, „ To print the date