Panasonic DMC-LX1PP operating instructions Playing Back Pictures with a TV Screen, 104

Playback (advanced)

Playing Back Pictures with a TV Screen

nPlaying back pictures with the

supplied cable

•Turn the camera and the TV off.

•Set the [TV ASPECT]. (P26)

B 2 1

A

1 Connect the AV cable A

(supplied) to the [AV OUT] socket of the camera.

•Connect the AV cable with the [f] mark facing the [w] mark on the [AV OUT] socket.

•Hold B and then insert or pull the AV cable straight.

2 Connect the AV cable to the video input and the audio input sockets of the TV.

•1 Yellow: to the video input socket

•2 White: to the audio input socket

3Turn the TV on and select external input.

4 Turn the camera on and then set the mode dial to playback mode [Q].

•You can display pictures on a TV only when the mode dial is set to playback mode [Q].

nViewing pictures in other countries When setting [VIDEO OUT] on the menu, you can view pictures on a TV in other countries (regions) which use the NTSC or PAL system.

• Even if you set menu selection for [VIDEO OUT] to [PAL], the output signal is still NTSC in the recording mode.

nPlayback pictures on TV with SD

Memory Card slot

You can put your SD Memory Card in a television with an SD Memory Card slot to show still images. (Depending on the television, some pictures may not take up the whole screen).

•You cannot play motion pictures. Use the included AV cable when playing motion pictures. (See left)

•You may be unable to play MultiMedia Cards, even if the television has an SD Memory Card slot.

•Do not use any other AV cables except the supplied one.

•Read the TV operating instructions too.

•Audio playback is in monaural.

•Pictures might be slightly blurred if you show them vertically on a television (connected with the included AV cable).

104

VQT0S19