Recording pictures (advanced)

For setting, see page 70.

Continuous AF [CONT.AF]

SCN1 SCN2

This mode allows you to compose a picture more easily by always focusing on the subject.

When the AF mode is set to 1-area- focusing, 1-area-focusing (high speed) or spot-focusing, the time required for focusing when pressing the shutter button halfway will be reduced.

When it is set to [ON], the [ ] indication appears.

The battery may be consumed faster than usual.

It may take time to focus on the subject after rotating the zoom lever from Wide to Tele or suddenly changing the subject from a distant one to a nearby one.

Press the shutter button halfway again when it is difficult to focus on the subject.

You cannot use this with the scene modes (P61) [STARRY SKY], [FIREWORKS], [NIGHT PORTRAIT], or [NIGHT SCENERY].

If the focus switch is set to [AFw], the time to focus will not be shorter.

For setting, see page 70.

NAF Assist Lamp

[AF ASSIST LAMP]

SCN1 SCN2

Illuminating the subject with the AF assist

lamp allows the camera to focus on the

subject in low light conditions.

 

When you press the

1

shutter button halfway in

 

dark places or other

 

situations, an AF area

 

wider than usual appears

 

and the AF assist lamp 1

 

turns on.

 

ON

The AF assist lamp turns on under

 

low light conditions. In this time,

 

the AF assist lamp icon [S]

 

appears on the screen. The

 

effective range of the AF assist

 

lamp is 4.92 feet (1.5 m).

 

OFF

The AF assist lamp does not turn

 

on.

 

Be sure of the following points when the AF assist lamp is in use.

–Do not look into the AF assist lamp closely.

–Do not cover the AF assist lamp with your fingers or other objects.

AF assist lamp is fixed to [ON] in Auto mode [0].

You cannot use the AF assist lamp in [SCENERY], [NIGHT SCENERY], [FIREWORKS] and [SELF PORTRAIT] in scene mode. (P61)

When you do not want to use the AF assist lamp (e.g. when you take a picture of a subject in a dark place), set the [AF ASSIST LAMP] to [OFF]. In this case, it becomes difficult to focus on the subject.

The AF area (P76) is set only to a point on the center of the screen when the AF assist lamp is turned on.

77

VQT0S19

Page 77
Image 77
Panasonic DMC-LX1PP operating instructions Continuous AF CONT.AF, AF Assist Lamp