Panasonic DMC-LX1PP operating instructions 120

	Others
n Playback
Conditions	Causes
The picture is not played	Is the card inserted?
back.
	Is there a picture in the card?
	Is the mode dial set to playback [Q]?
Pictures rotate	One of the features of this unit can automatically detect when
unexpectedly.	you have turned the camera side on to take a picture, then
	rotate that picture for you when you play it back.
	In some cases, the unit may detect that you have turned the
	camera side on, when in fact you are facing it up or down.
	• Set [ROTATE DISP.] (P93) to [OFF] so that the camera does
	not rotate these kinds of pictures for you.
	• You can use [ROTATE] (P94) to rotate the pictures when
	necessary.
Images are grainy or	Check that ISO sensitivity isn’t too high or that shutter speed
noisy.	isn’t too slow.
	• Reduce ISO sensitivity. (P73)
	• In [PICT.ADJ.], set [NOISE REDUCTION] to [HIGH]. (P79)
	• Improve the ambient light.
Folder or file name	The picture may have been changed on a computer or taken
appears as [–] and the	on a different manufacturer’s camera.
display goes black.	This problem can also occur if you remove the battery
	immediately after taking a picture or if the battery had very
	little charge left.
	• You will need to reformat the card to delete this type of
	picture. (P103) (Remember that all data will be irretrievably
	erased when you format the card, so save your data and
	check the card before proceeding.)

120

VQT0S19