Panasonic DMC-LX1PP Setting Date/Time Clock Set, Select M/D/Y, D/M/Y or Y/M/D, Set date and time

Preparation

Setting Date/Time (Clock Set)

nInitial setting

The clock is not set when the camera is shipped. When you turn the camera on, the following screen appears.

PLEASE SET THE CLOCK

CLOCK SET

2 Select [M/D/Y], [D/M/Y] or [Y/M/D].

CLOCK SET

10 : 00 DEC. 20. 2005

MDY

SELECT SET EXIT MENU

•Take the lens cap off before setting the date and time.

•Press the [MENU] button, the screen shown in step 1 appears.

•The setting screen disappears in about 5 seconds. Switch the unit back on to show the above screen again. Alternatively, press the [MENU] button to show the menu screen (P23), select [CLOCK SET] on page 2/4 of the setup menu, and do steps 1 and 2.

1 Set date and time.

CLOCK SET

0 : 00 JAN . 1 . 2005

MDY

SELECT SET EXIT MENU

•w/q : Select the desired item.

•e/r : Set date and time.

•Close the menu by pressing the [MENU] button 2 times after finishing the setting.

•Check if the clock setting is correct, after turning the camera off and on.

•When a fully charged battery has been inserted for more than 24 hours, the clock setting is stored (in the camera) for at least 3 months even if the battery is removed. (The storing time may be shorter if the battery is not charged sufficiently.)

If more than 3 months has passed, the clock setting will be lost. In this case, set the clock again.

•You can set the year from 2000 to 2099. The 24-hour system is used.

•If you do not set the date, the date cannot be printed when you go to a photo studio for digital printing.

•For the date print setting, refer to P96.

22

VQT0S19