Panasonic DMC-LX1PP operating instructions Inserting/Removing the Card

Models: DMC-LX1PP

1 136
Download 136 pages 21.11 Kb
Page 16
Image 16

Preparation

Inserting/Removing the Card

Check that the camera is turned off and that the lens is retracted.

Close the flash.

1 Slide the card/battery door to open it.

3 1 Close the card/battery door.

2Slide the card/battery door to the end and then close it firmly.

2Insert:

Insert the card with the label side facing the back of the camera until it clicks.

Remove:

Push the card until it clicks, then pull the card out upright.

• Check the direction of the card.

2

1

If the card/battery door cannot be completely closed, remove the card and insert it again.

The card and the data may be damaged if it is inserted or removed while the camera is on.

We recommend using Panasonic’s SD Memory Card. (Use only the genuine SD card with SD Logo.)

Do not touch the connection terminals on the back side of the card.

The card may be damaged if it is not fully inserted.

16

VQT0S19

Page 16
Image 16
Panasonic DMC-LX1PP operating instructions Inserting/Removing the Card