Preparations

1

Charging battery

 

Always charge before first use! (not sold pre-charged)

 

 

Preparations 2 Inserting battery and card

Charger (model-specific)

Battery (model-specific)

Insert the battery terminals and attach the battery to the charger

Ensure ‘LUMIX’ faces outwards.

Battery

(check orientation)

Card

(check orientation)

Do not touch connector

Set the camera ON/OFF switch to

OFF

Slide to the ‘OPEN’ position and open the lid

Completely insert battery and card (both click into place)

Close lid

Charging light (CHARGE)

On: Charging in progress (approx. 120 min.) Off: Charging complete

If light is flashing…

Connect the AC cable

The AC cable does not fit entirely into the AC input terminal.

A gap will remain as shown right.

Slide to the ‘LOCK’ position.

OPEN

LOCK

Battery temperature is too high/too low → Battery may still be charged, but it will take longer as it must adjust to the room temperature.

Battery/charger connector is dirty → clean with dry cloth.

Detach the battery after charging is complete

After charging is completed, be sure to disconnect the AC cable from the electrical outlet.

To remove

To remove battery, move lever in direction of arrow.

lever

Approximate battery life

Number of pictures:

270 [300 2] (at 30-sec intervals) 1 (equivalent to approx. 135 [150 2] mins) 1 Values based on CIPA standards. (P.91)

(Number reduced if intervals longer – 67 [75 2] pictures if 2-minute intervals) Playback time: Approx. 260 [280 2] mins

Above figures may be reduced if intervals between recording are longer; if flash, zoom, or POWER LCD are used frequently; or in colder climates (depends on actual usage). 2 DMC-TZ2

Note

Battery will be warm during charging and for some time thereafter.

Status indicator

To remove card,

press down in centre.

 

Compatible memory cards (optional)

The following SD standard-based cards (Panasonic brand recommended)

SD memory cards, 8MB-2GB

SDHC memory cards (4GB) → (P.11)

(4GB (or greater) cards without the SDHC logo are not of SD standard.)

For recording picture/time capacity, see (P.92)

For model numbers and types,

see http://panasonic.co.jp/pavc/global/cs (This Site is English only.)

MultiMediaCards (still images only)

Caution

SDHC logo

SDHC memory card

Battery will run out if not used for long periods of time, even after being charged. Charge the battery with the charger indoors (10 °C-35 °C).

Do not disassemble or modify the charger.

Please purchase a new battery if battery life becomes significantly reduced.

The battery charger is in the standby condition when the AC power supply cord is connected. The primary circuit is always "live" as long as the power cord is connected to an electrical outlet.

Battery can be topped up even if not fully depleted.

Always use genuine Panasonic batteries.

If you use other batteries, we cannot guarantee the quality of this product.

Do not remove card or battery while power is ‘ON’ or while status indicator is on (Camera may cease operating correctly, or card/recorded contents may be damaged). The reading/writing speed of a MultiMediaCard is slower than an SD memory card. When a MultiMediaCard is used, the performance of certain features may be slightly slower than advertised.

Keep the Memory Card out of reach of children to prevent swallowing.

14 VQT1B83

VQT1B83 15

Page 8
Image 8
Panasonic DMC-TZ2 operating instructions Charging battery, Preparations 2 Inserting battery and card, Off

DMC-TZ2 specifications

The Panasonic DMC-TZ2, introduced in 2007, marked a significant advancement in the compact digital camera market, combining portability with advanced photographic capabilities. Targeted at both amateur and seasoned photographers looking for a lightweight yet powerful option, the TZ2 offered a blend of features that made it stand out in its class.

At the core of the DMC-TZ2 is a 7.2-megapixel sensor that allows for high-resolution images and excellent detail capture. The camera features a Leica DC Vario-Elmar lens with a versatile 28mm wide-angle to 280mm telephoto range (equivalent in 35mm). This lens is perfect for a variety of shooting situations, from broad landscapes to distant subjects, enabling users to capture stunning images without the need for multiple lenses.

One of the standout features of the TZ2 is its Optical Image Stabilization (O.I.S) technology, a boon for handheld photography. This technology minimizes the blurriness caused by camera shake, especially in low-light conditions or when using zoom. Coupled with a fast f/3.3 to f/4.9 aperture, the TZ2 ensures that users can shoot confidently even in challenging lighting conditions.

The DMC-TZ2 also includes a 2.5-inch LCD screen with a high resolution, making it easy to frame shots and review images. The screen's brightness can be adjusted for better visibility in various lighting situations, contributing to the overall user-friendly experience. Furthermore, the camera features a variety of scene modes and intelligent automatic settings, facilitating effortless shooting without requiring in-depth camera knowledge.

In terms of additional technologies, the TZ2 boasts the Venus Engine III image processor, which enhances image quality while minimizing noise at higher ISO settings. This processor also contributes to faster shooting speeds and improved battery performance, allowing for extended usage during outings.

Built with a sleek, compact design, the DMC-TZ2 is made for portability, making it an ideal travel companion. Its robust construction ensures durability, while its lightweight design makes it easy to carry.

In conclusion, the Panasonic DMC-TZ2 provides an impressive combination of features, advanced technologies, and user-friendly options within a compact design. It represents a compelling choice for those seeking a versatile camera that can effortlessly capture high-quality images in a range of environments.