PYLE Audio 7505-BTSDCMHC25 user manual Preparing The Ikôn Rugged PDA For Operation, Battery

Chapter 2: Basic Checkout

Preparing The Ikôn Rugged PDA For Operation

2.2Preparing The Ikôn Rugged PDA For Operation

2.2.1The Battery

The Ikôn is powered with a Lithium Ion battery pack, 5000 mAh—Model No. CH3000.

Warning: Before charging the battery, it is critical that you review the battery safety guidelines in the Ikôn Rugged PDA Regulatory & Warranty Guide Regula- tory & Warranty Guide, PN 8000148.

Battery packs shipped from the factory are charged to approximately 40% and must be fully charged prior to use. Batteries can be charged using a variety of chargers and docking sta- tions along with an Ikôn internal charger. When using the internal charger, a suitable power source is required. The battery, and all chargers and docking stations are described in Chapter 6: “Peripheral Devices & Accessories” beginning on page 219.

2.3Turning The Ikôn On And Off

2.3.1Installing The Battery

Important: Press the Power button to turn off the PDA before opening the battery cover on your Ikôn (see “Switching The Ikôn Off” on page 12).

•To unlock the battery cover, turn the left-hand battery fastener to the left, and turn the right-hand battery fastener to the right.

•Remove the battery cover.

•Snap the charged battery into the unit. Replace the battery cover, and lock the fasteners in place.

Note: If you are using a docking station or an external power supply, you can insert an uncharged battery and switch it on.

2.3.2Switching The Ikôn On

•Press and hold down the Power button, located on the front of the unit at the top right, for at least one second.

•When the yellow LED flashes, release the Power button.

The desktop screen is displayed.

Ikôn Rugged PDA (Windows CE 5.0) User Manual 11