Chapter 5: Configuration

Power Management Properties

data stored on the Ikôn. Once the Ikôn shuts down, it cannot be switched on until a fresh battery is installed, or the unit is inserted in a docking station or cradle.

Slide the Suspend Threshold button to the right to increase the battery capacity reserved for backup purposes. Data will be preserved to a maximum of 124 hours.

Slide the Suspend Threshold button to the left to decrease the power reserved for backup purposes; this increases the Ikôn’s operating time—the amount of time the Ikôn will operate before shutting down—but reduces the power reserved for backup purposes to a minimum of 24 hours.

Internal super-capacitors will protect the data stored in the Ikôn while the battery is swapped for a fully charged one.

Important: Once the battery is removed, the super-capacitors will preserve the data stored on the Ikôn for approximately 5 minutes. It is critical that you install a charged battery before this time elapses.

5.5.5.4Advanced

Allow Suspend With:

This menu allows you to specify whether or not your unit will enter Suspend state while it is operating with an active PPP connection, network interface or active TCP/IP connection.

Low Power Warnings

The sliding scale at the bottom of this menu allows you to specify the remaining battery ca- pacity at which a warning message is displayed on the Ikôn screen, from 0% to 20%.

Ikôn Rugged PDA (Windows CE 5.0) User Manual

103

Page 115
Image 115
PYLE Audio 7505-BTSDCMHC25 user manual Advanced Allow Suspend With, Low Power Warnings