Chapter 5: Configuration

Decoded (Internal) Scanners

Code 128

5.14.2.6Code 128

Enabled

Set this parameter to on to enable “Code 128”.

Enable GS1-128/GS1 US

Previously UPC/EAN and UCC, these types of bar codes include group separators and start codes.

Enable ISBT 128

To successfully scan this variation, “Enable ISBT 128” must be set to on.

Decode Performance

If this parameter is set to on, one of three decode levels assigned to the Decode Performance Level parameter can be selected.

Decode Perf. Level

This parameter provides three levels of decode performance or “aggressiveness” for Code 128 symbols. Increasing the performance level reduces the amount of required bar code ori- entation—this is useful when scanning very long and/or truncated bar codes. Keep in mind that increased levels reduce decode security.

When you double-tap on this parameter, a dialog box is displayed in which you can enter a decode performance level of between 1 and 3.

Field Size/Chars

Refer to page 170 for details.

5.14.2.7EAN 13

Enabled

Set this parameter to on to enable “EAN 13”.

Prefix/Suffix

Prefix Char

This character, if non-zero, is added before a successfully decoded bar code. Press the key you want to insert in the dialog box attached to this parameter. The ASCII/Unicode key value of the keypress is displayed.

Ikôn Rugged PDA (Windows CE 5.0) User Manual

171

Page 183
Image 183
PYLE Audio 7505-BTSDCMHC25 user manual Enable GS1-128/GS1 US, Enable Isbt, EAN Enabled, Prefix/Suffix