PYLE Audio 7505-BTSDCMHC25 user manual Headset

Chapter 5: Configuration

Bluetooth Setup

the remote device is rebooted. In that case, you must deactivate the service and reactivate it to detect the current RFCOMM channel.)

Set PIN

PINs can be set for each device by pressing the Set PIN button in the Devices menu, or you can skip this step and try to connect to the device first.

Important: The remote device must have authentication enabled, otherwise the PIN authentication will fail.

•Highlight a device, click on the Set Pin button, and type the PIN.

You will receive a message, either that the PIN has been successfully validated or that it has been rejected.

If the PIN has been validated, an asterisk (*) appears in the PIN column in the Devices list box, indicating that this device has a PIN set. Once a PIN is entered, it is saved in

the registry.

To remove the PIN:

•Choose Set PIN, and press [ENTER].

If the Ikôn attempts to connect to a remote device that has Authentication enabled and does not have a required PIN set, an Authentication Request dialog box appears.

•Enter the PIN, and tap on OK to connect the devices.

5.6.1.2Headset

The Headset connection is initiated from this menu, and the headset speaker and micro- phone volumes can be adjusted here.

Ikôn Rugged PDA (Windows CE 5.0) User Manual 115