PYLE Audio 7505-BTSDCMHC25 UPC E Enabled UPC-E, Enabled UPC-E1, UPC-E And UPC-E1 Check Digit

Chapter 5: Configuration

Decoded (Internal) Scanners

UPC E

System Char—system character transmitted with the data,

Country Code and System Char—both the country code (“0” for USA) and system character are transmitted with the data, or

None—no preamble is transmitted. The lead-in characters are considered part of the symbol.

Prefix/Suffix

See “Prefix/Suffix” on page 171.

5.14.2.10 UPC E

Enabled UPC-E

Set this parameter to on to allow “UPC E” bar code scans.

Enabled UPC-E1

Set this parameter to on to allow “UPC-E1” (zero suppressed) bar code scans.

UPC-E And UPC-E1 Check Digit

If you enable one or both of these parameters, a check digit is included with the decoded bar code data.

UPC-E And UPC-E1 Preamble

When you double-tap on one of these parameters, a dialog box is displayed where you can choose one of three options for lead-in characters for UPC-E and UPC-E1 symbols transmit- ted to the host device:

System Char—system character transmitted with the data,

Country code and System Char—both the country code (“0” for USA) and system char- acter are transmitted with the data, or

None—no preamble is transmitted. The lead-in characters are considered part of the symbol.

Conv. UPC-E To UPC-A

This parameter converts UPC-E (zero suppressed) decoded data to UPC-A format before transmission. After conversion, data follows UPC-A format and is affected by UPC-A pro- gramming selections (e.g., Preamble, Check Digit).

Ikôn Rugged PDA (Windows CE 5.0) User Manual 173