PYLE Audio 7505-BTSDCMHC25 Decoded Internal 2D Scanning Options Scanning Mode, Scan Data Format

Chapter 5: Configuration

Decoded (Internal) Scanners

Decoded (Internal) 2D Scanning Options

When this parameter is enabled, a bar code must be successfully scanned in both directions (forward and reverse) before being decoded.

5.14.2.3Decoded (Internal) 2D Scanning Options

Scanning Mode

When you double-tap on this parameter, a dialog box is displayed in which you can choose one of the following scanning modes: Smart Raster, Always Raster, Programmable Raster, Slab Pattern, Cyclone Pattern, or Semi-Omni Pattern.

Raster Height And Raster Expand Rate

These parameters determine the laser pattern’s height and rate of expansion.

Note: These parameters are only used when either Programmable Raster or Always Raster is assigned to the “2D Scanning Mode” parameter. “2D Raster Height” and “2D Raster Expand Rate” are intended for very specific applications and are usually not required for normal scanning purposes.

Double-tapping on this parameter displays a dialog box in which you can enter a value from 1 to 15.

5.14.2.4Decoded (Internal) Data Options

Transmit Code ID Char

A code ID character identifies the scanned bar code type. In addition to any single character prefix already selected, the code ID character is inserted between the prefix and the decoded symbol.

When you double-tap on this parameter, a dialog box is displayed in which you can choose a transmit code: None, AIM, or Symbol.

Scan Data Format

This parameter allows you to change the scan data transmission format. Double-tapping on Scan Data Format displays the following options from which you can choose a data format: data (as-is), data [S1], data [S2], data [S1][S2], [P] data, [P] data [S1],

[P] data [S2], and [P] data [S1][S2].

Prefix [P], Suffix [S1] And Suffix [S2]

A prefix and/or one or two suffixes may be appended to scan data for use in data editing.

When you double-tap on these parameters, a dialog box is displayed in which you can enter a value from 0 to 255.

Ikôn Rugged PDA (Windows CE 5.0) User Manual 167