PYLE Audio 7505-BTSDCMHC25 user manual Advanced Interface And Network, AP Density, Enable IPv6

Chapter 5: Configuration

Advanced Interface And Network

This utility allows you to ‘tweak’ or adjust Advanced system settings (interface, network and servers), User settings (font size and docking port message), and provides a Registry Editor.

5.8.1Advanced Interface And Network

AP Density

This option allows you to determine the signal strength at which the Ikon radio will begin searching for a new Access Point (AP): High, Medium or Low. If, for example, this option is set to High, the radio will begin searching for a new Access Point while still at a fairly strong signal strength. Setting AP Density to Low will cause the radio to wait until the signal strength is significantly low before attempting to connect to another Access Point.

Depending on your site configuration—for example, the shelving, the Access Point cover- age, etc.—a higher setting may improve through-put, increase and maintain signal strength, and reduce missed transmissions.

Enable IPv6

This option allows you to enabled Internet Protocol specification, version 6, that has been published to use 128-bit IP address (replacing version 4).

130Ikôn Rugged PDA (Windows CE 5.0) User Manual