PYLE Audio 7505-BTSDCMHC25 user manual SCU Tabs, Main Tab

Appendix C: SCU For 802.11b/g Radio

SCU Tabs

C.1 SCU Tabs

This appendix provides details about each tab in the Summit Client Utility (SCU). For quick, step-by-step setup instructions, refer to “Configuring The Summit 802.11b/g” on page 13.

The following sections provide a detailed description of each of the tabs available in the SCU—Main(below), Profile (page C-4), Status (page C-9), Diags (page C-9), and Global (page C-10).

C.1.1 Main Tab

The Main tab is displayed when you tap on the Start>Programs>SCU icon.

•Enable/Disable Radio: Enables or disables the radio. This is a toggle button; when the radio is enabled, this button reads Disable Radio, and when the radio is disabled, the button reads Enable Radio.

•Active Profile: Lists the name(s) of the active configuration profile(s). When a profile is chosen from the Active Profile drop-down menu, the settings for that profile become active.

If ThirdPartyConfig is selected, after the Ikôn goes through a power cycle, WZC is used for configuration of the radio. See “ThirdPartyConfig” on page C-8 for details.

•Radio Type: Indicates the type of radio installed in the device, e.g. “BG” when an 802.11b/g radio is installed.

•Reg. Domain: Indicates the regulatory domain (e.g. ETSI, FCC or TELEC) for which the radio is configured. “Worldwide” means that the radio can be used in any domain.

•Status: Indicates if the radio is associated to an access point. If this is not the case, Status indicates the radio status.

Ikôn Rugged PDA (Windows CE 5.0) User Manual C-3