PYLE Audio 7505-BTSDCMHC25 Cleaning The CH1000 Vehicle Cradle, Removing The RAM Mount Interface

Chapter 6: Peripheral Devices & Accessories

Cleaning The CH1000 Vehicle Cradle

•Ensure the mounting has the capacity to hold the cradle and the Ikôn. Cradle plus Ikôn weight is approximately 1kg (2.2 lb.).

•Psion Teklogix has recommended and approved mounts—consult Customer Service for information.

Figure 6.11 Removing The RAM Mount Interface

To accommodate the service loop of the power cable, leave a 10.2 cm (4 in.) clearance at the bottom of the vehicle cradle. Leave a 17.8 cm (7 in.) clearance at the top of the vehicle cradle to allow easy removal of the Ikôn. When selecting a mounting location, refer to the detailed assembly instructions that are packaged with the pedestal.

Important: Before Psion Teklogix releases a product, our engineering team exposes that product to vibration tests to ensure the Ikôn will remain secure during normal use. But as a low cost mount, the cradle will not defend against shock if the vehicle undergoes a front or rear impact. Take care to mount the cradle in an upright position in case of accidents.

If you elect to use a third party company-produced cradle, Psion Teklogix cannot take re- sponsibility for the effects of that third party product when it causes failure to our device.

6.9.4Cleaning The CH1000 Vehicle Cradle

Important: Dampen a soft cloth with mild detergent to wipe the unit clean.

Ikôn Rugged PDA (Windows CE 5.0) User Manual 235