PYLE Audio 7505-BTSDCMHC25 user manual Be retrieved

Chapter 5: Configuration

Bluetooth Setup

•Choose the Devices tab and Scan for devices in your area.

•When the scan is complete, highlight the device you want to pair with and either double- click or press the Services button.

•If a PIN dialog box appears, type your PIN and tap on OK.

After entering the device PIN number, the Services dialog appears with a list of services available on that device.

•To select a service, double-click on the service you want, or highlight the service and press the space bar.

•In the drop-down list of options available, choose Active to pair the device.

A COM/BSP port name will appear next to the service for this device. Your device is now paired.

Scan

•Click on the Scan button to list available devices.

Figure 5.10 Available Bluetooth Devices

Wait for the Ikôn to complete its scan (approximately 20 seconds). When scanning starts, the Scan button will change to Stop—if necessary, you can tap on this button to stop the process. Once scanning is complete, all discovered devices will be displayed in the list box, with Name, Address, Active status, and PIN information.

Note: During the scanning process, addresses are located first, followed by names. Only the names of devices that are within the Bluetooth radio coverage range will

be retrieved.

The Active column indicates whether any service is activated for that device. When a service is activated, the device is displayed in the list even when it is not detected during the scan.

Ikôn Rugged PDA (Windows CE 5.0) User Manual 113