PYLE Audio 7505-BTSDCMHC25 Same Read Validate, Same Read Timeout, Diff Read Timeout, Code Enable

Chapter 5: Configuration

Decoded (ISCP)

Code 39

Low Power Timeout

To extend laser life, you can select the length of time the scanner remains active following a successful decode. The scanner wakes from low power mode when a bar code is scanned—a successful decode restores normal blinking.

When you double-tap on this parameter, a dialog box is displayed in which you can choose a value of 30 sec, 1 min, 2 min, or 3 min.

Note: This parameter is only used if the Trigger Mode has been set to Continuous On and the Ikôn is mounted in a fixed position; otherwise, ‘Low Power Timeout’ is not used.

Parameter Scanning

Setting this parameter to Enabled allows decoding of parameter bar codes.

Same Read Validate

The data is only transmitted after repeated reads give the same result. The value assigned at this parameter determines the number of reads required, from 0 to 10 times.

Same Read Timeout

Prevents the same bar code from being read more than once. The value assigned determines after what time period the scanner will timeout, from 0 to 2550 msec.

Diff Read Timeout

Prevents unwanted reading of other bar codes on the same label. The value assigned deter- mines after what time period the scanner will timeout, from 0 to 2550 msec.

5.14.3.3Code 39

Enable

Setting this parameter to on enables “Code 39”.

Full ASCII

If this parameter is enabled, the characters +, %, and / are used as escape characters. The combination of an escape character and the next character is converted to an equivalent ASCII character.

Reading Range

Determines the reading distance from which a bar code can be successfully scanned. The default setting, Extended, allows for increased reading distance.

182Ikôn Rugged PDA (Windows CE 5.0) User Manual