PYLE Audio 7505-BTSDCMHC25 user manual 2D UPC Half Block Stitching, Codabar Enabled

Chapter 5: Configuration

Decoded (Internal) Scanners

Code 93

are successfully decoded within one laser scan. This option should be enabled when bar codes are in proximity to each other.

2D UPC Half Block Stitching

Setting this parameter to on enables “UPC Half Block Stitching” for the omnidirectional scanner engine only.

5.14.2.12 Code 93

Enabled

Set this parameter to on to enable “Code 93”, or OFF to disable it.

Set Length L1 And Set Length L2

Lengths for “Code 93” can be set for Any length, Length within a range, One discrete length or Two discrete lengths. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s).

Double-tapping on this parameter displays a dialog box labelled Set Code Lengths where you can define the code length that will be recognized by your scanner.

Choosing One discrete length allows you to decode only those codes containing a selected length. Choosing Two discrete lengths allows you to decode only those codes containing two selected lengths. Length within a range allows you to decode a code type within a specified range from 4 to 55.

Field Size/Chars

Refer to page 170 for details.

5.14.2.13 Codabar

Enabled

Set this parameter to on to enable “Codabar”.

Set Length L1 And Set Length L2

Lengths for “Codabar” can be set for Any length, Length within a range, One discrete length, or Two discrete lengths. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s).

Double-tapping on this parameter displays a dialog box labelled Set Code Lengths where you can define the code length that will be recognized by your scanner.

Ikôn Rugged PDA (Windows CE 5.0) User Manual 175