Chapter 5: Configuration

Imager

Imager Options

5.14.4 Imager

Tap on the Scanner drop-down menu, and choose Imager.

5.14.4.1Imager Options

TekImager Enabled

Setting this option to on enables the imager installed in your Ikôn.

Continuous Scan Mode

Setting this parameter to on keeps image capture active and continuously decoding as long as the scanner button is pressed and held down.

Center Bar Code Only

Note: This parameter must be disabled when reading Composite bar codes.

When more than one bar code is visible in a single snap shot, this parameter allows you to specify that only the centre image within the imager framing marker be read. When this pa- rameter is set to on, the target dot is pointed at the centre image and only that image

is returned.

Max Number Barcodes

This parameter specifies the maximum number of bar codes the imager will attempt to decode in an image. A maximum of 6 bar codes can be decoded at one time.

Ikôn Rugged PDA (Windows CE 5.0) User Manual

195

Page 207
Image 207
PYLE Audio 7505-BTSDCMHC25 user manual Imager Options TekImager Enabled, Center Bar Code Only, Max Number Barcodes