Connecting

3

Viewing on TV screen

devices

 

with other

 

 

You can view pictures on a TV screen by connecting your camera to your TV with the supplied AV cable.

Preparations:Turn off both camera and TV.

Set the TV aspect (P.22).

Connect camera to TV

Turn on TV

Set to auxiliary input.

Turn on camera

Set to

Align marks and insert

Hold here

AV cable

(always use cable supplied)

Yellow: To video socket

White: To audio socket

Check socket direction and insert straight in. (Damage to socket shape can lead to faulty operation.)

If your TV has an SD memory card slot, you can view still pictures by inserting a card directly.

*Pictures may not be viewable from some MultiMediaCards.

Note

Do not use any other AV cables except the supplied one.

You can view pictures on TVs in other countries (regions) which use the NTSC or PAL system when you set ‘VIDEO OUT’ in SETUP menu. Even if you set ‘VIDEO OUT’ to ‘PAL’, the output signal will still be NTSC in the recording mode.

Some televisions may cut off the edges of pictures, or not display them full screen. Pictures rotated to portrait may be blurred slightly.

Change picture mode settings on TV if aspect ratios are not displayed correctly on widescreen or high-definition televisions.

Also consult TV operating manual.

If problems such as picture flickering occur, set ‘VIDEO OUT’ (P.22) to ‘NTSC’.

VQT1B61 79

Page 79
Image 79
Panasonic DMC-TZ3 Viewing on TV screen, Connect camera to TV Turn on TV, Turn on camera Set to, Set to auxiliary input