Panasonic DMC-TZ3 Memory Card Error Please Check the Card, Read Error Please Check the Card

Models: DMC-TZ3

1 108
Download 108 pages 38.22 Kb
Page 83
Image 83

Meanings of and required responses to major messages displayed on LCD monitor.

MEMORY CARD ERROR PLEASE CHECK THE CARD

Access to card has failed.

Insert card again.

MEMORY CARD ERROR MEMORY CARD PARAMETER ERROR

Card is not of SD standard. Only SDHC memory cards can be used for capacities of 4GB or greater.

READ ERROR PLEASE CHECK THE CARD

Data read has failed.

Check whether card has been inserted correctly (P.15).

WRITE ERROR PLEASE CHECK THE CARD

Data write has failed.

Turn off power and remove card, before re-inserting and turning on power again. Card may possibly be damaged.

MOTION RECORDING WAS CANCELLED DUE TO THE LIMITATION OF THE WRITING SPEED OF THE CARD

If ‘PICT.MODE’ is set to ‘30fps VGA’ or ‘30fps 16:9’, use a card of at least 10 MB/s (as marked on packaging, etc). (P.47)

Motion picture recording may be automatically terminated with certain cards.

A FOLDER CANNOT BE CREATED

Folder numbers in use have reached 999 (P.75).

Save all necessary data to computer (or other device), and ‘FORMAT’ (P.73). Folder number is reset to 100 when performing ‘NO.RESET’ (P.22).

PICTURE IS DISPLAYED FOR 4:3 TV/PICTURE IS DISPLAYED FOR 16:9 TV

AV cable is connected to camera.

To remove message immediately → Press ‘MENU/SET’. To change aspect ratio → Change ‘TV ASPECT’ (P.22). USB cable is only connected to camera.

Message disappears when cable is also connected to another device (P.74, 76).

VQT1B61 83

Page 83
Image 83
Panasonic DMC-TZ3 Memory Card Error Please Check the Card, Memory Card Error Memory Card Parameter Error