Panasonic DMC-TZ3 operating instructions Message displays

Others 2 Message displays

THIS MEMORY CARD IS LOCKED

Release using the write-protect switch on the SD memory card or SDHC memory card. (P.26)

NO VALID PICTURE TO PLAY

Take pictures, or insert a different card already containing pictures.

THIS PICTURE IS PROTECTED

Release the protection before deleting, etc. (P.69)

SOME PICTURES CANNOT BE DELETED/THIS PICTURE CANNOT BE DELETED

Non-DCF images (P.90) cannot be deleted.

→Save all necessary data to computer (or other device), and ‘FORMAT’ (P.73) card to delete.

NO ADDITIONAL DELETE SELECTIONS CAN BE MADE

The number of pictures that can be deleted at once has been exceeded.

More than 999 pictures have been set as ‘FAVORITE’.

The number of pictures than can be date stamped at once has been exceeded.

CANNOT BE SET ON THIS PICTURE

DPOF settings cannot be made for non-DCF images (P.90).

PLEASE TURN CAMERA OFF AND THEN ON AGAIN

Force has been applied to lens (or other component) and camera could not operate correctly.

→Turn on power again.

(Consult the dealer or your nearest Service Center if display still remains)

SOME PICTURES CANNOT BE COPIED/COPY COULD NOT BE COMPLETED

Pictures cannot be copied in following cases.

●Picture of same name already exists in copy destination. ●File is not of DCF standard (P.90).

●Picture taken or edited on a different device.

BUILT-IN MEMORY ERROR FORMAT BUILT-IN MEMORY?

Displayed when formatting built-in memory via computer, etc.

→Reformat directly using camera (P.73).

MEMORY CARD ERROR FORMAT THIS CARD?

Format cannot be recognized on this camera.

→Save all necessary data to computer (or other device), and ‘FORMAT’ (P.73).

82 VQT1B61