Preparations 1 Charging battery

Always charge before first use! (not sold pre-charged)

Battery (model-specific)

Charger (model-specific)

Indoor electrical outlet

(charge at room temperature of 10- 35°C (50°F-95°F))

Fold out pins and

plug into electrical outlet.

Disconnect charger and battery when charging is complete.

Connect to charger.

plug

(Ensure ‘LUMIX’ faces outwards.)

 

Charging light (CHARGE)

On: Charging in progress (approx. 120 min.)

Off: Charging complete

If light is flashing…

Battery temperature is too high/too low → Battery may still be charged, but it will take longer as it must adjust to the room temperature.

Battery/charger connector is dirty → clean with dry cloth.

Approximate battery life

Number of pictures:

270 [300 2] (at 30-sec intervals) 1 (equivalent to approx. 135 [150 2] mins)

1Values based on CIPA standards. (P.91)

(Number reduced if intervals longer – 67 [75 2] pictures if 2-minute intervals) Playback time: Approx. 260 [280 2] mins

Above figures may be reduced if intervals between recording are longer; if flash, zoom, or POWER LCD are used frequently; or in colder climates (depends on actual usage).

2DMC-TZ2

Note

Battery will be warm during charging and for some time thereafter.

Battery will run out if not used for long periods of time, even after being charged. Battery can be topped up even if not fully depleted.

Do not disassemble or modify the charger.

Please purchase a new battery if battery life becomes significantly reduced.

14 VQT1B61

Page 14
Image 14
Panasonic DMC-TZ3 Preparations 1 Charging battery, Fold out pins Plug into electrical outlet, Connect to charger