Panasonic DMC-TZ3 Set to Take a picture P.24, Taking close-up pictures of flowers, etc

Applications	8	Avoiding subject	Taking close-up
		blurring	pictures
(Record)
		(Intelligent ISO)	(MACRO mode)

Avoiding subject blurring in darker conditions or with fast-

moving subjects

Detects movement of the subject and sets the optimum ISO sensitivity and shutter speed according to the brightness.

Set to	Take a picture (P.24)
For moving subjects indoors…	For stationary subjects indoors…

sensitivity and shutter speed raised to avoid subject blurring.

sensitivity lowered to avoid interference.

F3.3 F3.3

The maximum level for ISO sensitivity can also be set (P.51, ‘ISO LIMIT’). If the maximum level is set to ‘800’ or ‘1250’, this will be reduced to ‘640’ when using the flash.

Subject movement may not be detected if subject is too small, is at the edge of the screen, or starts to move at the same time as the shutter. (when button is pressed fully).

Blurring may occur depending on the brightness and movement speed. ‘D.ZOOM’ (P.27) and ‘SLOW SHUTTER’ (P.56) cannot be used.

Focus range in Intelligent ISO mode, MACRO mode

Max. W: Distance of at	Max. T: Distance of at least 1
least 5 cm (0.16 feet)	m (3.28 feet) from subject
from subject	(	displayed)

Zoom lever

(2 m (6.56 feet) unless max. T)

	Taking close-up pictures of flowers, etc
Set to	Take a picture (P.24)

We recommend using a tripod, the self-timer (P.35), and flash ‘FORCED OFF’ (P.36).

Moving the camera after aligning the focus is likely to result in poorly focused pictures if subject is close to camera, due to margin for focus alignment being severely reduced. Resolution may be reduced around the edges of the picture.

Taking close-up pictures from more distant locations (Tele Macro function)

Zoom to max. T to take close-up pictures of flowers at foot-level, or animals that you cannot approach, from distances of at least 1 m (3.28 feet). Align focus after zooming by pressing shutter halfway. Using tripod is recommended as jitter occurs easily.

46 VQT1B61