Panasonic DMC-TZ3 operating instructions Using with computer, Connect camera to computer

Connecting	1	Using with computer
devices
with other

Preparations: Ensure that you have a sufficiently-charged battery, or an AC adaptor attached (DMW-AC5PP, sold separately).

Remove memory card if wishing to use built-in memory.

Turn on power of both camera and computer

Set to any mode except

(Do not move the mode dial while connected to computer.)

Displayed		Connect camera to computer
during data
transmission.
	ACCESS

USB cable

(always use cable supplied)

Align marks and insert

Hold here

If using AC adaptor, turn off camera

power before

plugging in or

removing.

Check socket direction and insert straight in. (Damage to socket shape can lead to faulty operation.)

Caution

Do not use any other USB connection cables except the supplied one.

If using Windows 98/98SE, install USB driver software when connecting for first time.

For more details, consult the separate ‘PC connection’ or your computer operating manual.

Do not disconnect the USB cable while ‘ACCESS’ is displayed.

Turn off power and disconnect USB cable before inserting or removing memory cards.

When using USB cable with Windows 2000, use ‘ Safely Remove Hardware’ application in task tray before inserting card.

If the battery display flashes red, cancel the connection from your computer, and disconnect the USB cable. (Recharge the battery before reconnecting.)

To play motion pictures on your computer

●Use the ‘QuickTime’ software on the supplied CD-ROM. (Installed as standard on Macintosh)

If using Windows 98/98SE/Me, download and install ‘QuickTime 6.5.2 for PC’ from the following website. http://www.apple.com/support/quicktime/

●Save motion pictures to your computer before viewing.

Only built-in memory can be accessed if connecting in CLIPBOARD mode.

74 VQT1B61