Chapter 3
Understanding UPS Operation
The UPS functions automatically to supply AC electrical power to the critical load. The UPS always operates in one of three modes:
AIn Normal mode, the critical load is supplied by the inverter, which derives its power from rectified utility AC power. In this mode, the rectifier also provides charging current for the battery.
AIn Bypass mode, the critical load is directly supported by utility power.
AIn Battery mode, the battery cabinet provides DC power, which maintains inverter operation. The battery supports the critical load.
The UPS continually monitors itself and the incoming utility power, and automatically switches between these modes as required, with no operator intervention. The sophisticated detection and switching logic inside the UPS ensures that operating mode changes are automatic and transparent to the critical load. The UPS switches operating modes in response to these system events:
AA command is an intervention that is externally initiated by an operator or by some site action. A command causes the UPS to switch operating modes; it usually does not require any further action by you.
AA notice is a minor system event that may or may not require your attention.
AAn alarm is a system event that requires immediate operator intervention.
System events, alarm horns, and indicator lights are described in Chapter 10, to System Events."
3.1 Normal Mode
In Normal mode, utility AC power is supplied to the rectifier. The rectifier supplies DC power to the inverter, which then supplies the critical load with AC power. The rectifier also provides charging power to the battery. The battery charge condition is monitored by the UPS and reported by a status indicator on the Monitor Panel. The message Normal" appears in the status area of the LCD screen.
Figure 3-1 shows the path of electrical power through the UPS system when the UPS is operating in Normal mode.
EATON Powerware® 9315 UPS | 3−1 |
