Table of Contents
4 Starting and Stopping the UPS | 4−1 |
4.1 Using the Control Panel | 4−1 |
4.1.1 To Place the UPS in Normal Mode | 4−2 |
4.1.2 To Shut Down the UPS from Normal Mode | 4−3 |
4.1.3 To Start the UPS in Bypass Mode | 4−3 |
4.1.4 To Shut Down Power to the Critical Load While in Bypass Mode | 4−3 |
5 Using the Monitor Panel | 5−1 | |
5.1 | Using the LCD Screen | 5−2 |
5.2 | Using the Buttons | 5−3 |
5.3 | Adjusting the Contrast | 5−3 |
5.4 | Using the Load Off Button | 5−3 |
5.5 | Reading the Status Indicators | 5−4 |
5.6 | Using the Menu Options | 5−4 |
6 Using Features and Options | 6−1 | |
6.1 | Building Alarm Monitoring | 6−1 |
6.2 | Summary Alarm Contacts | 6−2 |
6.3 | Remote Monitor Panel | 6−3 |
6.4 | Battery Cabinets | 6−5 |
6.5 | External Battery Disconnect | 6−5 |
6.6 | Relay Interface Module | 6−6 |
6.7 | Supervisory Contact Module | 6−7 |
7 Communication | 7−1 | |||
7.1 | Locating the Communication Bays | 7−1 | ||
7.2 | X−Slot Cards | 7−2 | ||
7.3 | LanSafe Power Management Software | 7−3 | ||
7.4 | Connecting Equipment to a Serial Port | 7−3 | ||
7.5 | Configuring the Serial Ports | 7−6 | ||
7.5.1 | Mode | 7−7 | ||
7.5.2 | Rate | . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 7−7 | |
7.5.3 | Data/Stop | 7−8 | ||
7.5.4 | Handshaking | 7−8 | ||
| 7.5.4.1 | Disabled (No Handshaking) | 7−8 | |
| 7.5.4.2 | XON/XOFF | 7−8 | |
7.5.5 | Save | . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | 7−8 | |
7.5.6 | Default Settings | 7−8 | ||
ii | EATON Powerware® 9315 UPS |
