- 127 -
Wi-Fi
2Operate the smartphone/tablet.
Once the connection is complete, the image from the camera will be displayed on the screen of
the smartphone/tablet.
(After this operation, it may take a while for the connection to be completed.)
The connection method differs according to your smartphone/tablet.
If you are using an iOS device
When scanning the QR code to set up a connection
(If you are reconnecting the camera, steps 1 to 5 are not required)
1Start “Image App”. (P125)
2Select [QR code], and then select [OK].
3Using “Image App”, scan the QR code displayed on the
screen of the camera.
4Install the profile of “IMAGE APP”.
A message will be displayed on the browser.
If the smartphone is locked with a passcode, enter the
passcode to unlock the smartphone.
5Press the home button to close the browser.
6Turn on the Wi-Fi function in the setting menu of the smartphone/tablet.
7Select the SSID displayed on the screen of the camera.
8Return to the home screen, and then start “Image App”.
(P125)
Cancel
Please scan the QR code using "Image App",
or enter the password into Wi-Fi settings
Please set on your smartphone
SSID:
Password:
Change method
DISP.
IMAGE APP
Panasonic Corporation
Wi-Fi
Wi-Fi
0123456789ABC
Wi-Fi
0123456789ABC