Preparation

Do not leave any metal items (such as clips) near the contact areas of the power plug. Otherwise, a fire and/or electric shocks may be caused by short-circuiting or the resulting heat generated.

Do not use any other USB connection cables except the supplied one or a genuine Panasonic USB connection cable (DMW-USBC1: optional).

Do not use any other AC adaptors except the supplied one.

Do not use a USB extension cable.

The AC adaptor (supplied) and USB connection cable (supplied) are for this camera only. Do not use them with other devices.

Remove the battery after use.

(The battery will be exhausted if left for a long period of time after being charged.)

The battery becomes warm after using and during and after charging. The camera also becomes warm during use. This is not a malfunction.

The battery can be recharged even when it still has some power left, but it is not recommended that the battery charge be frequently topped up while the battery is fully charged.

(Since characteristic swelling may occur.)

If a problem occurs in the power outlet, such as a power outage, charging may not be completed normally. If this happens, disconnect the USB connection cable (supplied) and connect it again.

When the charging lamp does not light even if you connect the camera to the AC adaptor (supplied) or a PC, check if they are connected correctly.

If you reconnect the USB connection cable (supplied) when the camera is fully charged, the charging lamp turns on for a while.

- 15 -

Page 15
Image 15
Panasonic DMC-ZS35 owner manual Since characteristic swelling may occur